MTESTWindows™

MTESTWindows™

MTESTWindows™ features Performance and Affordability:

• The capability to perform all commonly used mechanical tests.

• The ability to create your own test methods for a variety of requirements.

• Save and recall test methods for accurate and repeatable testing.

• Password protected supervisor/operator modes allow test methods to be activated then locked under password so they cannot be changed.

ADMET offers a wide variety of analysis methods to cover an array of industries and applications. New methods are always being added, so consult the factory for the most recent list of available analyses.

• Calculation of key test parameters such as Peak Load/Stress, Offset Yield, Modulus of Elasticity and more.

• Calculation of high, low, mean and standard deviation for a group of tests.

• Hardcopy printouts of single test reports, group test reports and X-Y plots.

• Storage of test data and results to hard disk in ASCII delimited format for easy import into common spreadsheet and database programs.

• Up to ten user-definable test information fields and a custom report/plot header to meet a variety of testing and reporting requirements.

• User selectable English, Metric and SI units.

• Up to three log rates per test to capture only necessary data.

• Real-time plotting of test data.

• Closed loop servo control with PID compensation. Includes monotonic, cyclic and segmented control profiles with software selectable control channels which can be changed on the fly.

• Large easy-to-read numeric displays that show live, peak and rate readings.

• Up to three analog input channels to measure load, axial and transverse strain. Load accuracy exceeds ASTM E-4 Standards.

• One encoder input channel to measure crosshead position.

• Up to five calibration tables per analog channel for multiple load cell and extensometer requirements.

• Up to five calibration points per transducer with piecewise linear fit between points for maximum accuracy. All calibrations are password protected and can be saved to disk.

• MTESTWindows™ environment provides: seamless access to many of today's popular spreadsheet programs; saving and recalling of test data over a network; and use of virtually any printer.

User definable test information fields is just one of the features which provide the flexibility needed for a wide variety of testing requirements.

Test Reports and X-Y Plots

Technical Associated Services      7832 Franklin Drive      Huntington Beach, CA. 92648      Tel: (714) 841-0475 Fax: (714) 841-4180      Email: anton44@tascalibration.com      Min Tensile: 80,000 psi      Min Yield: 75,000      Min E: 17,000,000	Specimen #: Operator: Type: Temperature: Geometry: Diameter: Thickness: Width: Gage Length: Area:	1A156 Rich 1234 Ambient Cut Tube 2.7500 in 0.0680 in 1.5010 in 2.0001 in 0.1083 sq in
	Date:  09/01/98       Peak Load Peak Stress Modulus of Elasticity Yield @ 0.20% Offset Yield @ 0.50% Extension-EUL Elongation @ Break E646 exp. n: 0.005-0.008 (e) E646 coef. K: 0.005-0.008 (e)	Time: 09:17:09       9517 LB 87849 psi 27544965 psi 83068 psi 83084 psi 7.195 % 0.120 158854 psi

MTESTWindows™ produces a variety of test reports and X-Y plots.  All test data and results are stored in ASCII delimited format for easy import into many common spreadsheet and data base programs.  The reports and plots can be from a single test or from a group of like tests.  A statistical summary for each calculated test parameter is provided on test reports where three or more samples are tested.

Servo Control

MTESTWindows™ can be installed on servo equipped electromechanical and electrohydraulic testing machines. It features monotonic, cyclic and segmented profiles under load, position or strain control. Also included is a Proportional-Integral-Derivative Control algorithm with software selectable control modes that can be changed on the fly. These features allow you to define a method for each of your testing needs.

Service and Training

ADMET strives to make its Materials Testing Products powerful and easy-to-use. We offer free phone support as well as in-house and on-site training seminars in which you will learn how to get the most out of your machine. We also offer seminars on how to install our products.